0

Support iDL46

iDL46

Do you own this product?

Add the iDL46 to your account to receive email notifications about software/firmware updates and more.

FAQ's

Discover answers to some of the most common questions about your iHome product.

    • It’s this model compatible with PROTECTIVE CASES?

      While the dock accommodates MOST protective cases, there may be some protective cases that may not be compatible and you may need to remove your case for proper docking.

    • My iHome unit is not recognizing my iOS device (iPhone/iPad/iPod) through the dock connector.

      Protective cases require removal prior to docking to the iHome unit. Please try docking the device without the protective case. NOTE: You can use the USB port to charge and play your device as well.

    • What products are compatible with AUX-input?

      The Aux input 3.5mm - 1/8 inch is compatible with any analog-audio device outputting audio from a headphone or line-out jack connector.

    • What is the wattage output?

      The unit produces 6 Watts of output.

    • The display is too dark?

      Try pressing the Snooze/Dimmer Button on top of the unit repeatedly to adjust the LED brightness.

    • What is the amperage for the USB port?

      The amperage for the USB port is 1 Amp.

    • Can the USB port charge Android devices?

      Yes, the USB port will charge most Android devices.

    • Can the unit operate on the back up batteries?

      The backup batteries only provide continuous clock and alarm operation in the event of a power failure. Other functions will not work.

    • Would I lose the time and alarm settings if I replace the backup batteries?

      NO, but make sure the AC adapter is connected. Otherwise, all settings may be lost during battery replacement.

    • Can I use this unit in other countries?

      Yes. The power adapter is able to handle input voltage from 100 to 240VAC. You may need a plug adapter to convert for the overseas outlet. Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that matches the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is USA. For more information on our international iHome products, please visit www.ihomeintl.com.

    • How to change the clock display to 12hr. mode or 24hr. mode (military time)?

      Press and hold “Clock Button” for 2 seconds. Press and release “Alarm 1 or 2 button” to select 12 or 24 hour display. Press clock button again (or no button within 10 seconds) and the settings are automatically saved.

    • What is “Sleep mode”?

      “Sleep mode” lets you fall sleep to your iPhone/iPod or radio, gradually lowering the volume until the unit shuts off at the selected time.

    • Should I disconnect the unit if I am going on vacation?

      If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage from power outage.

    • What’s the warranty period for this product?

      Limited 1 Year Warranty: iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase.

Still Have Questions?

Contact customer service about iDL46